AVE-120/150/200/250 PL

Print and laminating

Short description

  • Single-sided and double-sided treatment station for printing and lamination
  • Refreshment of material treated at the extruder
  • In conjunction with a nip roller, it can also be used as a web tension station


  • AVE-120D
  • AVE-150CA
  • AVB-150C
  • AVE-200E
  • AVB-200E
  • AVE-250E
Metal and ceramic electrodes (Order specific)
Ceramic electrodes also suitable for boost treatment of conductive materials
Very low risk of ceramic electrode breakage
Patented flexible holders allow the ceramic electrodes to pivot in the running direction and radially.
Compact construction
The design can usually be installed even in tight spaces
Electrode housing with metal enclosure
Lowest possible EMC levels, no fire-hazard, large high-voltage clearances ensure that no flashovers or creepage discharges can occur through moisture or contamination when compared with electrodes using plastic shielding, long lifetime.
High-voltage transformer, mounted directly onto the electrode housing, no external high-voltage wiring
Avoids electric shocks, fires and interference radiation
Treatment and nip rolls (Order-specific)
Avoid slippage and reverse-side treatment
Silicone, ceramic or stainless steel coating according to application
Spray gap can be set from the outside
Ceramic high-voltage Insulators
No danger of creepage discharges or incineration, unlike Teflon or other plastic material insulators. High degree of inherent safety.